EyeFoss™

Last year of production: 2025
Last year of spare parts and support: 2032

Image analysis with EyeFoss™ ensures that you get the same results regardless of the operator or location.

It ensures consistent test results across the entire grain receival network while providing a practical way to handle more grain samples in less time.

Order

EyeFoss™ gives grain receivers the world’s first objective assessment of visually assessed grain quality. It ensures consistent test results across the entire grain receival network while providing a practical way to handle more grain samples in less time.

Where you can analyze

In the laboratory or harsh grain receival environments

What you can analyze

Wheat, barley and durum

Parameters

Damaged grain and Foreign material

Analysis time

Less than 4 minutes

Principle

Image analysis

Value

Standardised assessment of visual parameters across measuring sites and objective measurement of damaged grain and foreign material for easy and reliable results.

Type sample

Wheat, barley and durum

Parameters

Visually assessed parameters such as: damaged grain and foreign material.

“This device (EyeFoss ed.) revolutionised our sorting, because in 3-4 minutes, you obtain a broken-grain rate that is as consistent and reliable as an official analysis.”

In this video, Quality Manager Mickaël Maisonneuve from Invivo group in France, explains how revolutionary image analysis of grain helps to spot defects such as broken kernels in grain. Each lorry load of grain arriving at the port can be checked within a few minutes. The loads can then be allocated for shipment according to quality expectations from customers.

Slides

10.000 kernels in 4 minutes

Using the new image analysis technology, grain passes under a 3D laser, 2D lights and camera to capture data. This data is then processed using a series of calibrations to determine the quality results. The EyeFoss™ can asses 10.000 kernels, or a standard half litre sample, in just four minutes and doesn’t add any more time to the sampling process.

Less training of staff

Getting highly skilled staff in place often at remote locations can be problematic and costly during the busy harvest season. EyeFoss™ encapsulates this experience, empowering any operator to make assessments while reducing the burden of tough decisions. • Consistent measurements by anyone with minimal training • Low maintenance, easy to clean solution that is robust to harsh receival-stand environments • Easy-to-use interface with low risk of operator error

Technical specification

Feature	Specification
Dimensions (W x D x H)	660 x 490 x 620 mm
Weight	50 kg
External fuses	T 4AL 250TP
Rated current	2.0 A (100 V) 0.8 A (240 V)
Power consumption	200 VA
Noise level	< 56 dB(A)
Power supply	100-240 V AC*), frequency 50-60 Hz, Class 1, earthed
Power cable	115V UL/CSA: C13 connector 10 A 125 V, UL/CSA approved 3 wire cable with protection ground SVT 18 AWG,UL/CSA approved 230V CE: C13 connector 10 A 250 V, CE/VDE/S approved 3 wire cable 0.75mm2 H 05 VV-F, CE/VDE/S approved
Ambient temperature	5-42 °C
Storage temperature	-20 °C to 70 °C
Ambient humidity	< 93 % RH
Operation	Indoor use
Altitude	Up to 2000 m
Transient over-voltage	According to category II
Pollution	Degree 2
*) Mains supply voltage fluctuations not exceeding ±10 % of the rated voltage.
Instrument management
Network services	FossManager™
Software	FossIntegrator

EyeFoss™ Last year of production: 2025 Last year of spare parts and support: 2032

Value

Type sample

Parameters

“This device (EyeFoss ed.) revolutionised our sorting, because in 3-4 minutes, you obtain a broken-grain rate that is as consistent and reliable as an official analysis.”

Slides

10.000 kernels in 4 minutes

Less training of staff

Technical specification

Files for download

Service request

Fill out the form and our specialists will contact you as soon as possible

Your request has been sent

EyeFoss™

Last year of production: 2025
Last year of spare parts and support: 2032